Table of Contents
Advertisement
e Write value input
The value input here is set at the write value field of the unit selected in
comes the setting change value of the item selected in
NOTES:
• For the set value of each function setting, refer to
Installation manual of the indoor unit or the outdoor unit.
• When clearing the write value, click the Set button with the field blank after selecting the tar-
get unit.
f Read button
Acquires the value of the item selected in
read value field in
can be canceled by clicking the button again.
g Write button
Performs setting of the value input at the write value field of
Thereafter, the setting contents result is displayed at the read value field of
After the setting is completed, subsequent processing can be canceled by clicking the button
again.
h Progress bar
Displays the processing progress of
i Close button
Closes this screen (Remote Setting screen). However, when read/write processing for unit was
performed, confirmation dialog box opens to confirm whether to save the data to a CSV file.
NOTES:
• When both remote setting of the outdoor unit and the setting from the push button on the
PCB of the outdoor unit are performed, the setting performed later will be valid.
• When the remote setting of the outdoor unit and the setting from the push button on the PCB
of the outdoor unit are performed at the same time, the remote setting will be invalid. Check
that the push button is not used before starting the remote setting.
2-3. Setting by service tool (UTY-ASGXZ1)
d
. After the acquirement of the value is completed, subsequent processing
f
or
- (07-84) -
c
.
"Function details"
c
from the unit selected in
d
. for the unit selected in
g
.
d
.This input value be-
on page 07-108, or the
d
, and displays it at the
d
.
d
for check use.
2. Function settings
Advertisement
Chapters
Table of Contents
