Table of Contents
Advertisement
September 2007
Extension Updates using ConfSchd
When you use the configuration type ConfSchd to schedule extension
updates, you again use a five-instruction CSV declaration, as shown in the
following examples.
ConfSchd,Site,Recorder,Date,Time CR
In the above declaration, five instructions are used. ConfSchd (1), Site (2),
Recorder (3), Date (4), and Time (5). These instructions are separated by a
comma and are described in Schedule Field Descriptions.
Example 3
ConfSchd,Yaesu,,2004-03-10,14:11 CR
In this example the Yaesu extension configuration batch upload (a
scheduled update) is configured to take effect from the 10th of March 2004
at 11 minutes past 2 in the afternoon. Two commas appear after Yaesu,
indicating that "All Recorders" are the target of the scheduled update.
User Guide
Understanding Export Formats
89
Advertisement
Chapters
Table of Contents
