Installing Security - Bay Networks 5000 Installation Manual

penril_image bfs/pri_sng-1_2 bfs/oper.64.enet man
bin/SUN src/examples src/snmp src/erpcd
This may take some time.
*** Installing Annex images ***
As the installation proceeds, the script directs the output to the
file install.out in the working directory for possible use in
troubleshooting.
Executing "du -s bin/[A-Z]*"
2413 bin/SUN
To save room on your system, the above directories can
be removed. You may want to enter "?" at the prompt
below to get more help.
Remove these directories (y/n) [n]:
5. Enter y to remove the directories, or press Return to leave the
directories intact.
The script warns you if a file has been updated. It tells you which files
the script has moved, and to what directory.
Warning an updated version of modems.annex has been
installed.
NOTICE: These files have been saved prior to installing
new versions:
afd_list config.annex modems.annex oper.64.enet
penril_image pri_sng-1_2
They are in directory /usr/spool/erpcd/bfs/PRE-
970709.
Renaming directory "save" to "OLDsave"

Installing Security

The installation script prompts you for the security regime to use for the
RAC. The default selection is an enhanced version of the Access Control
Protocol (ACP) Server.
The access control protocol server (ACP) that handles
security requests depends on data in a file named
acp_regime. This file does not exist and must be
created with a line that specifies a security policy
for your site.
Installing Remote Access Concentrator Software for UNIX
Chapter 2 Installing the Software
2-9