Using The Acp_Dialup File - Bay Networks NA User Manual

Chapter 3 Understanding Erpcd

Using the acp_dialup File

Using Remote Access Concentrator Server Tools for Windows NT
3-18
5. Use the reset annex security command to reset security for
the RACs whose keys you added or changed.
6. Use the Services control panel to restart erpcd.
The acp_dialup file stores user names, RAC names and addresses, and
port numbers. Erpcd matches Annex and user entries to provide IP
addresses for users dialing in to the network. It denies access to users if
it does not find a matching entry.
To use the information in acp_dialup, you must set the
address_origin parameter to
RAC to search the acp_dialup file for the remote client's user name
and for local and remote addresses.
To create an entry in the acp_dialup file:
1. From the Bay Networks program group window, double-
click on the appropriate icon to open the acp_dialup file.
The acp_dialup file opens in the Notepad editor.
2. Go to the end of the file and enter a user name. If
authentication is performed with multiple domain
controllers, enter the domain name and the user name like
this:
domain-name\\user-name
3. Enter one or more port numbers followed by @ and one or
more RAC names or IP addresses.
Separate port numbers with commas and/or enter a range of
numbers with dashes (e.g.,
via the na utility. This allows a
ACP
.
1,3,6-10@Annex01)