Nortel 1000 Hardware Installation Manual page 32

Chapter 3 Hardware Installation and Initial Configuration
Connecting and Powering up the Application Gateway
Figure 13 Application Gateway with open bezel door
Floppy and
CD-ROM Drives
24
Application Gateway Hardware Installation Guide
Note 1: The MAC addresses are visible on the lower right-hand side
when the bezel door is open. See
Note 2: MAC1 is Port 1 and MAC2 is Port 2.
Note 3: Though the MAC1 address is the top address, Port 1 is the
bottom network interface on the back of the Application Gateway.
Note 4: Figure 15 on page 25
ELAN and TLAN network interfaces.
Figure 14 MAC address label
MAC1
(top)
Press the Power switch
b.
indicator is lit.
Figure 14 on page
shows the LEDs that correspond to the
(bottom)
(Figure 15). Notice that the green LED power
553-AAA0105
24.
MAC2
553-AAA0106