Nortel 1000 Hardware Installation Manual page 21

You will need one network cable to connect the Application Gateway
to a LAN or two cables if the Application Gateway will straddle two
networks.
The contents of the accessories pouch to install the Application
5.
Gateway. The accessories pouch should contain the following items:
Two support brackets (A)
a.
Two rack-mounting brackets (B)
b.
Six rack-mount bracket screws (10-25 x 1/4" panhead Phillips)
c.
Two bezel door long rack-mount screws
d.
Refer to Figure
immediately.
Figure 4 Application Gateway brackets
CAUTION
The load rating for this mounting kit is 50 pounds
(23 kilograms). If you exceed this limit, damage
or injury can occur.
Chapter 3 Hardware Installation and Initial Configuration
4. If any parts are missing, contact your supplier
Application Gateway Hardware Installation Guide
Materials Required
13