Nortel 2340 Installation Manual page 35

1
Use a web browser to launch the web GUI setup wizard. Enter the IP address of the appliance in the URL:
https://<WLE2340_IP_Address>:8003.
2
On first install, the default username and password will be shown at the bottom of the screen. Enter the
username and password.
Note.
The default username is admin and the password is password.
3
Click Sign In. The Change Password window appears. Click on the Change Password to change the
admin password.
Enter the following:
• Current Password - Enter the password, which you are currently using.
• New Password - Enter a new password.
• Password Again - Re-enter the new password.
4
To save the changes, click Change Password.
Note.
The Intial Administration GUI login is limited to access to the Administration. This
login does not pertain to the Location Engine Web GUI.
Software Installation of WLAN Location Engine 2340 35
Nortel WLAN — Location Engine 2340 Installation