Nortel 2340 Installation Manual page 37

• DNS Servers
❥
❥
3
To Save the Changes, click OK.
Configuring the WLE2340 Ethernet
The Nortel WLAN LE has four Ethernet interfaces. The ethernet interfaces are listed as follows:
• eth0
• eth1
• eth2
• eth3
To configure the ethernet, you can do the following:
1
Move the mouse over the Ethernet configuration section to activate the Edit link in the upper right hand
corner.
2
Select the DHCP.
or
You can configure manually with IP Address, Netmask, and Gateway.
3
To save the changes, click OK.
4
Launch the Initial admin GUI with new WLE2340 IP Address with port 8003
http://<new_WLE2340 IP address>:8003
To add DNS servers, use the plus sign (+)
To modify the DNS servers, use the Edit and Remove links.
Software Installation of WLAN Location Engine 2340 37
Nortel WLAN — Location Engine 2340 Installation