Figure 9.
2380 Installation—Center-Mount Equipment Rack
First, attach brackets to chassis.
Then, install chassis into rack.
1
Remove the four bracket screws from each side of the 2380.
2
Align a bracket over the screw holes:
•
For a front-mount equipment rack, align the bracket so that the bracket flange is flush with the
2380's front panel and extends away from the switch.
•
For a center-mount equipment rack, align the bracket so that the bracket flange is located near the
center screw holes.
3
Reinsert the screws to secure the brackets to the 2380.
4
Repeat for the other bracket.
Warning!
remaining steps. If you accidentally drop the WSS, you can be injured and the
switch can be damaged.
Nortel WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Nortel recommends that you ask someone to assist you with the
Installing and connecting a WSS 49
n s o
le
C o
R s t
le
n so
C o
R st