Nortel 2382 Configuration Manual page 27

Table 3: WSS Status LEDs—WSS 2350 (continued)
LED Appearance
AP (port 2 only) Solid green
Alternating green and
amber
Solid amber
Blinking amber
Unlit
Nortel WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Meaning
For an AP's active link, with PoE enabled,
all the following are true:
• AP has booted.
• AP has received a valid configuration
from the WSS.
• Management link with an AP is
operational.
AP is booting with an image received from
the WSS.
If the LED remains in this state indefinitely,
the boot or configuration attempt has failed.
PoE is on but no AP is connected to the link.
AP is not connected or is unresponsive, or
there is a PoE problem.
Port is not configured as an AP access port,
or PoE is off.
WSS overview 27