Nortel 2382 Configuration Manual page 26

26 WSS overview
Figure 6. WSS 2350 LEDs
LED
Power status
Link
(ports 1 and 2)
Factory Reset
(port 1 only)
NN47250-301 (320656-E Version 02.01)
Factory Reset
LED
1
Link LED
Table 3: WSS Status LEDs—WSS 2350
Appearance
Solid green
Unlit
Solid green
Solid amber
Blinking green
Blinking amber
Solid green
Blinking green
Unlit
AP LED
2
Power
supply LED
Meaning
The switch is receiving power.
The switch is not receiving power.
100-Mbps link is operational.
10-Mbps link is operational.
Traffic is active on the 100-Mbps link.
Traffic is active on the 10-Mbps link.
The switch is booting and is loading its
configuration file. This LED state lasts for
three seconds.
The switch is booting but the factory reset
switch is being pressed. The switch does not
load its configuration file but instead
contacts WLAN Management Software to
request a configuration.
This LED state lasts for three seconds.
The switch has finished booting.