Table of Contents
Advertisement
L
Figure 4. Blade removal components.
K. Blade Cover Lock Knob (1 of 2): Turn knob
clockwise to open blade cover; turn knob
counterclockwise to secure blade cover.
L.
Blade Cover (1 of 2): Protects blade and
wheels from elements, and guards operator
from entanglement and injury.
M
Figure 5. Inside blade cover components.
M. Blade Tension Scale: Displays recommend-
ed blade tension according to blade width
and current tension setting.
N. Blade Guide (1 of 2): Supports blade.
Model G0960 (Mfd. Since 09/22)
K
O. Blade Tracking Knob: Adjusts blade
P. Blade Tension Lever: Turn lever clockwise
Circuit Breaker
N
Q. Circuit Breaker Reset Button: Allows
O
Figure 6. Blade tracking and tension controls.
tracking on wheels.
to tension blade; turn lever counterclockwise
to release tension; lift lever to disengage.
Q
Figure 7. Location of circuit breaker.
machine to be restarted after thermal over-
load protection has tripped. To reset, push
ON/OFF switch in, wait a few minutes for
machine to cool, then press reset button. If
button does not stay depressed, allow motor
to cool longer, then try again.
P
-5-
Advertisement
Table of Contents
