Grizzly G0960 Owner's Manual page 39

2.
Turn blade cover lock knobs clockwise to
open blade covers (see Figure 65).
Blade Cover
Lock Knobs
Figure 65. Location of blade cover lock knobs.
3.
Push blade tension lever down to engage ten-
sion if not already done (see Figure 66), then
turn lever clockwise to tension blade, watch-
ing blade until proper tension is achieved. If
blade shifts or does not sit squarely on blade
wheels during step, release tension, reposi-
tion blade, then re-tension.
Figure 66. Blade tension lever in down position.
Model G0960 (Mfd. Since 09/22)
Blade Tension
Lever
Note: Refer to blade tension scale shown in
Figure 67 to adjust blade tension for installed
blade width.
Blade Tension
Scale
Figure 67. Location of blade tension scale.
4.
Close blade covers and secure with lock
knobs.
-37-