Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Track
A
E
Figure 1. Track components.
A. Log Clamp (1 of 2): Secures log against log
support.
B. Rail: Supports carriage.
C. Adjustable Foot (1 of 6): Keeps track level
and stable.
D. Log Support (1 of 2): Secures and levels log
to ensure flat cuts.
IMPORTANT: Log supports and log clamps
must be adjusted/angled to stay below saw
blade height during operation.
E. Log Bunk (1 of 4): Supports log.
-4-
manual
BEFORE
B
D
C
Carriage
F
Figure 2. Blade height controls.
F.
Blade Height Handwheel: Provides notch-
es to position blade height lever at 0.01"
increments. One full revolution of handwheel
moves blade approximately 0.2".
G. Blade Height Index Plunger: Uses cam-
action to seat plunger in blade height
handwheel notches to secure height setting.
Turn lever 180° to keep plunger from seating.
H. Blade Height Handle: Raises/lowers saw
blade.
I
Figure 3. Operator controls.
I.
ON/OFF Switch w/Disabling Key: Turns
machine ON when pulled out; turns machine
OFF when pressed in. When key is removed,
button is disabled and machine cannot start.
J.
Push Handle: Moves carriage along track.
Model G0960 (Mfd. Since 09/22)
G
H
J
Advertisement
Table of Contents
