Bar Mounting Studs; Tools, Servicing Aids; Removing The Bar Mounting Studs; Installing The Bar Mounting Studs - Stihl MS 500i Service Manual

6

Bar Mounting Studs

6.1

Tools, Servicing Aids

Combination wrench – 1129 890 3401
–
Torque wrench – 5910 890 0312 or equivalent
–
Stud puller, M8-7.5 – 5910 890 3000
–
Stud puller, M8 – 5910 893 0501
–
Loctite 270 (high-strength threadlocking adhesive) –
–
0786 111 2109
6.2

Removing the Bar Mounting Studs

Preparations, @ 3.1.
N
Remove the chain sprocket cover.
N
Use stud puller 5910 893 0501 to remove the collar
N
stud (1).
6.3

Installing the Bar Mounting Studs

Coat threads of collar studs (1) with Loctite 270.
N
Use stud puller 5910 890 3000 to fit and tighten down
N
the collar studs (1).
Fit the chain sprocket cover.
N
6
1
M8 (23 Nm / 204 lbf. in.)
1
M8 (23 Nm / 204 lbf. in.)
MS 500i