Installing The Antivibration Elements - Stihl MS 500i Service Manual

14
10
11
Take out the screw (12).
N
Remove the retainer (13).
N
Take out the screw (10).
N
Ease the tank housing away from the crankcase
N
(arrow) and hold it there.
Unlock the detent (arrow)) and pull out the AV spring
N
(11).
17.3

Installing the Antivibration Elements

14
10
11
Ease the tank housing away from the crankcase
N
(arrow) and hold it there.
Push the AV spring (11) into the guides in the tank
N
housing until the detent (arrow) snaps into place.
Position the tank housing on the crankcase so that
N
the bearing plug (14) is in its seat in the crankcase.
Insert and tighten down the screw (10).
N
28
12
13
11
N
N
N
12
13
11 N
N
N
N
N
N
13
Fit the retainer (13) so that the impulse hose (15) is in
the recess (arrows).
Insert and tighten down the screw (12).
Install the filter base, @ 15.3.
6
Coat stub (arrow) on handlebar bracket (5) with press
fluid.
Push the annular buffer (6) onto the stub as far as the
stop.
Screw the spring (4) clockwise onto the handlebar
bracket (5) as far as stop.
Screw the bearing plug (3) clockwise onto the
spring (4) as far as stop.
Ease the tank housing away from the crankcase and
hold it there.
3
4
5
Position the annular buffer (6) in its seat in the
crankcase.
13
15
15
5
6
MS 500i