Handle; Tools, Servicing Aids; Removing The Handlebar; Installing The Handlebar - Stihl MS 500i Service Manual

9

Handle

6
7
9.1

Tools, Servicing Aids

Socket, T27x125 – 0812 542 2104 or equivalent
–
Torque wrench – 5910 890 0302 or equivalent
–
Screwdriver, T27x200 – 5910 890 2415 or equivalent
–
9.2

Removing the Handlebar

Preparations, @ 3.1.
N
Take out the screws (5).
N
Take out the screw (3).
N
Take out the screws (1).
N
Remove the handlebar (2) from the guide (7).
N
MS 500i
M6x26
(8 Nm /
71 lbf. in.)
5
P6x32.5
(6 Nm / 53 lbf. in.)
9
8
3
M5x20
4
(6 Nm / 53 lbf. in.)
10
8
Ease the handle housing (8) away from the
N
crankcase (arrow) and hold it there.
Pull the handlebar (2) off the screw bosses on
N
handlebar mount (9).
Remove the handlebar (2) forwards, over the hand
N
guard.
Pull off the bushing (10).
N
Take out the screw (4).
N
9.3

Installing the Handlebar

Insert and tighten down the screw (4).
N
Push bushing (10) onto the screw (4) so that it snaps
N
into place.
Fit the handlebar (2) over the hand guard from the
N
front.
2
1
P6x32.5
(6 Nm /
53 lbf. in.)
2
9
9