NETGEAR RT311 Reference Manual page 53

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Click on OK.
4.
The router should respond with a "Password:" prompt. Type the current password to access the
Manager interface. The default password is 1234.
.When using Telnet, consider the following restrictions:
• Single administrator
To prevent confusion and discrepancy on the configuration, the router allows only one
terminal connection at any time. The router also gives priority to the RS-232 connection over
Telnet. If you have already connected to the router through Telnet, you are logged out if
another user then connects through the RS-232 cable. You can use a Telnet connection only
after the other administrator has disconnected.
• System timeout
When you are connected to the router through Telnet, there is a system timeout of 5 minutes
(300 seconds). If you are not configuring the device and leave it inactive for this timeout
period, the router automatically disconnects from the Telnet session.
Using the Manager Interface for Initial Router Configuration 5-3