Figure 4-4. Browser-Based Setup Wizard, Third Screen - NETGEAR RT311 Reference Manual

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
• If RoadRunner provided an authentication server address, enter it as Login Server IP
address. Otherwise, leave this field as 0.0.0.0.
Not all RoadRunner regions require a login program. If your region does not require a
login, leave Service Type as Standard.
9. Click on Next to go to the final Wizard screen shown in
Figure 4-4. Browser-based Setup Wizard, third screen
This screen provides setup for the following parameters:
WAN IP Address Assignment: Unless your ISP has assigned a fixed permanent IP
a.
address for your use, select "Get automatically from ISP". Otherwise, enter your IP
Address, Subnet Mask, and the IP Address of your ISP's gateway router.
DNS Server Address Assignment: If you know that your ISP does not automatically
b.
transmit DNS addresses to the router during login, select "Use this server" and enter
the IP address of the ISP's DNS server.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically your ISP transfers the IP addresses of one or
two DNS servers to your router during login. If the ISP does not transfer an address, you
must obtain it from the ISP and enter it manually here. If you enter an address here, you
should reboot your PCs after configuring the router.
Using Your Browser for Configuring the Router
Figure 4-4 below.
4-5