Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Key Features
The Model RT311 and RT314 Internet Access Gateway Routers provide the following features:
•
Ethernet LAN connection at 10 megabits per second (Mbps) or 100 Mbps
–
Internal four port 10/100 switch (Model RT314 router)
–
Single 10/100 port (Model RT311 router)
–
Autosensing for Ethernet (10BASE-T) or Fast Ethernet (100BASE-Tx) transmissions
–
Half-duplex or full-duplex operation
•
Ethernet connection to a wide area network (WAN) device, such as a cable modem or DSL
modem
–
RJ-45 interface allowing connection to a 10BASE-T device
•
Protocol Support
–
IP routing
–
Dynamic extended Network Address Translation (NAT+) with port forwarding for
operation with a single static or dynamic IP address
–
Dynamic Host Configuration Protocol (DHCP) server for dynamically assigning
network configuration information to PCs on the LAN
–
DHCP client for dynamically obtaining configuration information from the Internet
Service Provider (ISP)
–
DNS Proxy for simplified configuration
–
PPP over Ethernet (PPPoE) support
•
Login capability
–
Automatically executes user login for RoadRunner cable modem service or PPP over
Ethernet accounts
•
Easy installation and management
–
Configure from a web browser
–
Built-in Manager interface for configuration of advanced features, accessible by serial
terminal or Telnet Protocol
–
Configurable through the LAN—no serial connection required
•
Security
1-2
Introduction