Figure 8-3. Menu 24.4 - System Maintenance - Diagnostic; Table 8-5. System Maintenance - Diagnostic Fields - NETGEAR RT311 Reference Manual

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Figure 8-3. Menu 24.4 - System Maintenance - Diagnostic
From the Main Menu, enter 24 to display Menu 24 - System Maintenance. Enter 4 to display Menu
24.4 - System Maintenance - Diagnostic. The available commands are listed in
Table 8-5. System Maintenance - Diagnostic Fields
Field Command
Ping host [Enter 1]
WAN DHCP [Enter 2]
Release
WAN DHCP [Enter 3]
Renew
Intenet Setup Test [Enter 4]
Reboot system [Enter 11]
System Maintenance
Menu 24.4 - System Maintenance- Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Description
This diagnostic test pings a local or remote host. You are prompted for
the IP address of the host.
Release the DHCP-assigned parameters received from the ISP.
Issue a new DHCP request to the ISP for configuration parameters.
Attempt to login to the ISP, showing progress messages.
Your system is rebooted, implementing any changes that may have
been recently added to your system.
Table 8-5.
8-7