NETGEAR RT311 Reference Manual page 124

H
host name 3-6, 5-8
I
IETF xvii
IGMP 5-13
Input and Output Filters field, Ethernet Setup menu
5-11
installation 1-2
Internet, accessing 6-1
IP addresses
and NAT 10-7
and the Internet 10-2
assigning 10-2
masquerading 1-3
private 10-7
IP configuration by DHCP 10-10
IP networking
for Windows 95 3-2
for Windows 98 3-2
IP Protocol field, TCP/IP Filter Rule menu 7-7
IP Source Route field, TCP/IP Filter Rule menu 7-7
IP Subnet Mask field, Edit IP Static Route menu 6-7
L
LEDs
description 2-4
troubleshooting 9-2
Length field, Generic Filter Rule menu 7-9
log 8-4
Log and Trace menu 8-4
Log Facility field, Syslog and Accounting menu 8-5
Log field
Generic Filter Rule menu 7-10
TCP/IP Filter Rule menu 7-8
M
MAC Address 5-9, 9-6
MAC address 10-9
2
Manager interface
commands 5-6
menus 5-6
troubleshooting 9-6
using for configuring 1-2, 3-7
Manager interface menus
Diagnostic 8-6, 8-7
Edit IP Static Route 6-7
Filter Rules Summary 7-3, 7-9
General Setup Menu 5-8
Generic Filter Rule 7-9
Internet Access Setup 6-1
LAN Setup Menu 5-10
Log and Trace 8-4
Main 5-5
Syslog and Accounting 8-5
System Security 5-13
System Status 8-1
TCP/IP Filter Rule 7-6
WAN Setup 5-9
WAN Setup Menu 5-9
MANAGER port 2-7
Mask field, Generic Filter Rule menu 7-9
Metric field
Edit IP Static Route menu 6-8
mode, command interpreter 8-11
More field
Generic Filter Rule menu 7-9
TCP/IP Filter Rule menu 7-8
Multicast 5-13
N
Name field, System Maintenance menu 8-3
NAT. See Network Address Translation
NetBIOS Name Service 7-11
netmask
translation table 10-6
Network Address Translation 1-3, 10-7
network checklist 2-2, 3-1
O
Offset field, Generic Filter Rule menu 7-9
Index