Using The Manager Interface; Turning On Power To The Router; Figure 5-1. Start-Up Display - NETGEAR RT311 Reference Manual

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

Using the Manager Interface

Turning on Power to the Router

When power is first applied to the router, several internal tests are performed by the router.
Your Internet line is initialized at this time. During the initialization, the start-up display is
transmitted over the serial Manager port, as illustrated in
visible from a serial connection, as the router will not accept a Telnet connection until initialization
is complete.
Bootbase Version: V1.12 | 1/27/2000 18:31:01
RAM: Size = 4096 Kbytes
DRAM POST: Testing:
FLASH: intel 8M
RAS Version: V3.20(M.00) | 5/26/2000 19:43:28
Press any key to enter debug mode within 3 seconds.
..........................................
Figure 5-1. Start-up Display
5-4
4096K OK
Using the Manager Interface for Initial Router Configuration
Figure 5-1. Note that this display is only