Table of Contents
Advertisement
3.
Loosen the screw (1) using the Allen key.
4. Set the desired angle.
5. Re-tighten the screw.
5.20.3 Setting the end stop of the footrest
•
6 mm Allen key
•
10 mm wrench
1529686-AA
1.
The end position of the footrest is determined by means
of a rubber stop (1).
2.
The rubber stop can be screwed in or out (A) or pushed
up or down (B).
Fig. 5-63
Fig. 5-64
Setup
79
Advertisement
Table of Contents
