Adjusting The Depth; Adjusting/Removing Tray - Invacare Storm4 Series User Manual

1. Undo the height adjustment Allen screws (1).
2. Set the trunk support to the required height.
3. Retighten the screws.

5.13.3 Adjusting the depth

Tools:
• 5 mm Allen key
1529686-AA
1. Open the zip.
2. Undo the screws (1) for the depth adjustment.
3. Adjust the trunk support to the required position.
4. Retighten the screws.
5. Close the zip again.

5.14 Adjusting/Removing Tray

WARNING!
Risk of Injury or Damage
If the mobility device is fitted with a tray or other
auxiliary equipment this could break free during
transfer to a vehicle and cause damage or injury
to users in the event of a collision.
– When possible, other auxiliary mobility device
equipment should be either secured to the
mobility device or removed from the mobility
device and secured in the vehicle during travel.
– If a tray is fitted, always remove it before
transporting the mobility device.
Setup
67