Setting The End Stop Of The Footrest - Invacare TDX SP2 User Manual

Invacare® TDX® SP2 Series
1.
Loosen the screw (1) using the Allen key.
2. If the footrest cannot be moved after loosening the
screw, position a metal pin in the designated borehole
(2) and use a hammer to knock on this lightly. The
clamping mechanism in the interior of the footrest will
be released by this. Repeat the procedure from the
other side of the footrest if necessary.
62
3.
Loosen the screw (1) using the Allen key.
4. Set the desired angle.
5. Re-tighten the screw.

5.15.3 Setting the end stop of the footrest

• 6 mm Allen key
• 10 mm wrench
1578997-E