Setting The Angle; Setting The End Stop Of The Footrest - Invacare TDX SP2 Series User Manual

5.13.2 Setting the angle

CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
– Before and during every journey it is imperative
to ensure that the legrests contact neither the
castor wheels nor the ground.
• 6 mm Allen key
1.
Loosen the screw (1) using the Allen key.
2. If the footrest cannot be moved after loosening the
screw, position a metal pin in the designated borehole
(2) and use a hammer to knock on this lightly. The
clamping mechanism in the interior of the footrest will
be released by this. Repeat the procedure from the
other side of the footrest if necessary.
1578997-N
3.
Loosen the screw (1) using the Allen key.
4. Set the desired angle.
5. Re-tighten the screw.

5.13.3 Setting the end stop of the footrest

• 6 mm Allen key
• 10 mm wrench
Setup
53