Invacare Storm4 Series User Manual page 65

Upper multi-angle
A
rotational pivot
Upper linkage
B
Middle linkage
C
Lower linkage
D
Mounting post
E
Lower multi-angle
F
rotational pivot
1529686-AA
Fig. 5-53
• 360° rotation
• 80° tilt
• 180° rotation
• 100° rotation
• 180° rotation
• 360° rotation in
90° increments
• 360° rotation
• 50° tilt
Installing
• 2.5 mm Allen key
• 4 mm Allen key
• 5 mm Allen key
1. Using hardware provided, align and install headrest
clamp assembly into existing mounting holes in backrest
pan A.
2. Install headrest pad (not shown) to headrest rod using
mounting hardware provided.
The headrest pad can be adjusted to any desired
angle via the pivot ball at the end of the
headrest rod by loosening and tightening the
mounting hardware.
3. Loosen and remove lower D-Ring E from hardware.
Fig. 5-54
Setup
65