Adjusting The Length Of The Legrest; User; Adjusting The Angle Of The Foot Plate - Invacare Storm4 Series User Manual

1. Loosen the counternut (1).
2. Move the legrest to the desired position by turning the
spindle (2).
3. Tighten the counternut.

5.19.2 Adjusting the length of the legrest

Tools:
• 5 mm wrench
1. Loosen the fastening screws (1).
2. Slide the foot support to the desired height.
3. Tighten the fastening screws.
1529686-AA
5.19.3 Adjusting the calf pad to the calf width of the user
The calf pad of the legrest can be adapted to the user's calf
width by bending apart or together.
1. Bending the calf pad to the desired width.

5.19.4 Adjusting the angle of the foot plate

Tools:
• 5 mm wrench
Setup
77