Nortel Meridian Mail Installation Quick Reference Manual page 132

8-38
Port selection for VT520
Comm
Print
To configure an NT220 terminal
Follow these steps to configure an NT220 terminal.
Standard 1.0
S1 S2
Comm
com1
com2
Print
com3 com3
Step Action
1 Press <
2 Use the following keys to view and change setup values:
Up and down arrow keys Move from field to field.
<Enter>
To move to the next setup screen, select To Next Set–Up
Screen on any setup screen.
3 To save changes, return to the General Set–Up screen, move
the cursor to the Save Current Values field, and press <Enter>.
4 To exit setup mode, press <
Modular Option EC Installation Quick Reference Guide
Installing peripheral devices and cabling
S3
Comm
Off
Print
com3
>.
SETUP
Scroll through possible values
or cause a requested action to take
place.
SETUP
Configure the administration terminal
S4
Comm
Off
Print
com3
G101110
>.
November 1999