Centre-Stand - APRILIA SCARABEO 125 Service Manual

Suspensions
•
Unscrew and remove the two front
bolts «1» fixing the plate and collect the
nuts and the washers.
•
Remove the right suspension plate.
Locking torques (N*m)
Screw fixing the silencer plate to the engine
(18.5 lbf ft)

Centre-stand

CAUTION
ALLOW ENGINE AND EXHAUST SILENCER TO COOL OFF.
SECURE THE vehicle SO THAT IT IS POSSIBLE TO OPERATE IN TOTAL SAFETY AND WITHOUT
THE SIDE STAND.
To remove the centre stand together with its sup-
port, proceed as follows:
•
Make sure the vehicle is still supported,
without the help of the centre stand.
•
Undo and remove the two screws «1»
from both sides.
•
Remove the centre stand together with
its support.
Locking torques (N*m)
M8 screw fixing screw stand support to engine 25 (18.5 lbf ft)
To remove the centre stand from its support, pro-
ceed as follows:
•
Make sure the vehicle is still supported,
without the help of the centre stand.
•
Remove the springs «2» from the
spring linking pins «3» from both sides.
•
Undo and remove the screw «4» from
both sides.
•
Remove the stand.
Locking torques (N*m)
M10 screw fixing stand to stand support 50 (37 lbf ft)
SUSP - 158
SCARABEO 125 - 200
25