APRILIA SCARABEO 125 Service Manual page 142

Suspensions
•
Collect the spacer.
Front wheel hub overhaul
•
Remove the front wheel.
•
Clean the two sides of the hub with a
cloth.
•
Remove the right oil seal «1».
•
Remove the right bearing «2» with a
suitable extractor.
•
Remove the left oil seal «3».
•
Remove the left bearing «4» with a
suitable extractor.
•
Carry out a thorough check of the bear-
ings.
•
Collect the internal spacer «5».
•
Clean the inside of the hub thoroughly.
•
Wash all the parts with clean deter-
gent.
CAUTION
UPON REFITTING, USE A BUFFER WITH A DIAMETER
EQUAL TO THE EXTERNAL RING OF THE BEARINGS TO
INSERT THE BEARINGS. DO NOT HIT THE BALLS AND/OR
THE INTERNAL RING. MAKE SURE THE FOLLOWING
COMPONENTS ARE FITTED PERFECTLY IN:
•
THE LEFT BEARING «4» ON THE HUB;
•
THE SPACER «5» ON THE LEFT BEARING
«4»;
•
THE RIGHT BEARING «2» ON THE SPACER
«5»;
SUSP - 142
SCARABEO 125 - 200