SCARABEO 125 - 200
•
Disconnect the coolant temperature
sensor cable «12».
•
Disconnect the connector «13» of the
magneto flywheel cable and spark plug
tube «14».
NOTE
GET A HOIST AND BELTS FOR LIFTING.
•
Fasten the belts to the chassis rear
section.
•
Lift the hoist arm until the belts are taut.
•
From the left side of the vehicle, un-
screw and remove the left shock ab-
sorber fixing screw from the gusset
«15» and collect the nut.
Locking torques (N*m)
M10 lower screw fixing shock absorber
ft)
50 (37 lbf
Engine from vehicle
ENG VE - 63