Table of Contents
Advertisement
Table 4-28 Inactive/Hot Replacement Procedure of a PCI Expansion Unit
Work
Order
1
2
3
4
5
6
7
8
9
10
11
*1 Do not switch the mode switch on the OPNL to Locked at this point.
4.4
Inactive/Cold Replacement Workflows
This section describes the workflows for inactive/cold replacement of the FRUs
mounted in the SPARC M12-2S.
You can perform inactive/cold replacement only in the following system configurations:
Building block configuration where two or more physical partitions are operating
■
Before performing replacement work, be sure to check the notes on maintenance
work in the Fujitsu SPARC M12 Product Notes of the XCP version used.
Task
Checking the operating condition of the
system
Confirming the PCI expansion unit to be
replaced
Checking the operation status of the
SPARC M12-2S connected to the PCI
expansion unit to be replaced
Powering off the physical partition
containing the SPARC M12-2S connected
to the PCI expansion unit requiring
maintenance
Switching the mode switch on the OPNL
to Service
Removing the FRUs in the faulty PCI
expansion unit
Installing a FRU in the PCI expansion unit
Powering on the physical partition
containing the SPARC M12-2S that
underwent maintenance
Confirming that there is no problem with
the replacement PCI expansion unit
Switching the mode switch on the OPNL
to Locked
Checking the operating condition of the
system
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"8.2
Troubleshooting"
PCI Expansion Unit for Fujitsu SPARC
M12 and Fujitsu M10/SPARC M10 Service
Manual
"9.5.1 Stopping a Specific Physical
Partition"
"2.3.2 OPNL Control
Function"
PCI Expansion Unit for Fujitsu SPARC
M12 and Fujitsu M10/SPARC M10 Service
Manual
PCI Expansion Unit for Fujitsu SPARC
M12 and Fujitsu M10/SPARC M10 Service
Manual
"10.8 Powering on a Physical
(*1)
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
Function"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
Chapter 4 FRU Replacement Workflows
Domains"
Partition"
Domains"
103
Advertisement
Table of Contents
