System-Stopped/Cold Replacement Workflow Of The Hddbpu - Fujitsu Oracle SPARC M12-2 Service Manual

Table 4-57 System-Stopped/Cold Replacement Procedure of the HDD/SSD (continue d)
Work
Order
4
5
6
7
8
9
10
11
12
13
14
4.6.7 System-Stopped/Cold Replacement Workflow of
the HDDBPU
Table 4-58
Table 4-58 System-Stopped/Cold Replacement Procedure of the HDDBPU
Work
Order
1
2
3
4
138 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Stopping all physical partitions
Switching the mode switch on the OPNL
to Service
Removing the power cords of all the
SPARC M12-2/M12-2S units
Removing the HDD/SSD from the
SPARC M12-2/M12-2S
Installing an HDD/SSD in the SPARC
M12-2/M12-2S
Installing the power cords on all the
SPARC M12-2/M12-2S units
Diagnosing all the SPARC M12-2/M12-2S
units
Confirming that there is no problem with
the replacement HDD/SSD
Switching the mode switch on the OPNL
to Locked
Powering on the physical partitions
Checking the operating condition of the
system
shows the workflow for system-stopped/cold replacement of the HDDBPU.
Task
Checking the operating condition of the
system
Confirming the HDDBPU to be replaced
Checking the operation status of the
SPARC M12-2/M12-2S that houses the
HDDBPU to be replaced
Stopping all physical partitions
Reference
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control Function"
"9.8.2 Removing the Power
"15.3.1 Removing an HDD/SSD"
"15.4.1 Installing an HDD/SSD"
"10.1.1 Installing a Power
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control Function"
"10.9.1 Starting the System With an
XSCF Command"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"8.2 Troubleshooting"
"8.1.2 Checking Hardware"
"9.5.2 Stopping All Physical
Partitions"
Cords"
Cord"
Domains"
Domains"
Partitions"