Inactive/Cold Replacement Workflow Of The Xbu - Fujitsu Oracle SPARC M12-2 Service Manual

Table 4-41 Inactive/Cold Replacement Procedure of the Crossbar Cable (continued)
Work
Order
12
13
4.4.14

Inactive/Cold Replacement Workflow of the XBU

You can perform inactive/cold replacement of the XBU in the following configuration:
Building block configuration where two or more physical partitions are operating
■
Table 4-42
Table 4-42 Inactive/Cold Replacement Procedure of the XBU
Work
Order
1
2
3
4
5
6
7
8
9
120 Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Switching the mode switch on the OPNL
to Locked, and powering on the physical
partition containing the SPARC M12-2S
that has undergone maintenance
Checking the operating condition of the
system
shows the workflow for inactive/cold replacement of the XBU.
Task
Checking the operating condition of the
system
Confirming the XBU to be replaced
Checking the operation status of the
SPARC M12-2S that houses the XBU to be
replaced
Powering off the physical partition
containing the SPARC M12-2S that
houses the XBU requiring maintenance
Switching the mode switch on the OPNL
to Service
Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
Placing the SPARC M12-2S requiring
maintenance into the cold state, and
removing the XBU from the SPARC M12-2S
Installing the XBU in the SPARC M12-2S,
and placing the SPARC M12-2S that
required maintenance into the hot state
Incorporating the SPARC M12-2S that
required maintenance into the building
block configuration
Reference
"10.8 Powering on a Physical
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"8.2 Troubleshooting"
"8.1.2 Checking Hardware"
"9.5.1 Stopping a Specific Physical
Partition"
"2.3.2 OPNL Control Function"
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
"20.3 Removing an XBU"
"20.4 Installing an XBU"
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
Partition"
Domains"
Domains"