System-Stopped/Cold Replacement Workflow Of The Fanu - Fujitsu Oracle SPARC M12-2 Service Manual

Table 4-54 System-Stopped/Cold Replacement Procedure of the PSU (continue d)
Work
Order
4
5
6
7
8
9
10
11
12
13
14
4.6.4 System-Stopped/Cold Replacement Workflow of
the FANU
Before replacing the FANU, see
Precautions for FRU
Table 4-55
Table 4-55 System-Stopped/Cold Replacement Procedure of the FANU
Work
Order
1
2
3
Task
Stopping all physical partitions
Switching the mode switch on the OPNL
to Service
Removing the power cords of all the
SPARC M12-2/M12-2S units
Removing the PSU from the SPARC
M12-2/M12-2S
Installing a PSU in the SPARC M12-2/
M12-2S
Installing the power cords on all the
SPARC M12-2/M12-2S units
Diagnosing all the SPARC M12-2/M12-2S
units
Confirming that there is no problem with
the replacement PSU
Switching the mode switch on the OPNL
to Locked
Powering on the physical partitions
Checking the operating condition of the
system
Replacement."
shows the workflow for system-stopped/cold replacement of the FANU.
Task
Checking the operating condition of the
system
Confirming the FANU to be replaced
Checking the operation status of the
SPARC M12-2/M12-2S that houses the
FANU to be replaced
Reference
"9.5.2 Stopping All Physical
"2.3.2 OPNL Control
"9.8.2 Removing the Power
"13.3 Removing a
"13.4 Installing a
"10.1.1 Installing a Power
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
"10.9.1 Starting the System With an
XSCF Command"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"Precautions for FANU
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"8.2 Troubleshooting"
"Table 2-19 FANU LEDs and Their
States"
Chapter 4 FRU Replacement Workflows
Partitions"
Function"
Cords"
PSU"
PSU"
Cord"
Function"
Domains"
replacement" in "7.1
Domains"
135