Parameter Pages Overview - Theben DU 1 Manual

6.4 Parameter pages overview

6.4.1 General
Parameter page
General
6.4.2 Dimming actuator
Parameter page
Channel C1
Configuration options
Dimming response
Dimming value limits
Soft switching
Block function
Feedback
Force
Scenarios
Hour counter and
service
Diagnostic messages
Power failure and
restoration
6.4.3 External inputs
Parameter page
Input I1, I2
Configuration options
Switch object 1, 2
Direct switching
Button object 1, 2
Dimming
Blinds
Double-click
Window contact
Only for blinds actuator.
8
Flush-mounted dimming actuator DU 1
Description
Activate binary inputs.
Description
Characteristics of channel and activation of additional functions (soft
switching, force, scenes, etc.).
Load selection, dimming times, dimming switch-on value, etc.
Scope of the limit.
Brightness/dimming value and time settings for soft switching.
Type of block telegram and response to blocking.
Format of the feedback objects and cyclical transmission time.
Response in forced operation.
Selection of scene numbers relevant to the channel.
Type of hour counter and, if applicable, service interval, etc.
Activate transmission of the diagnostic and error messages.
Behaviour during failure and restoration of bus and mains power.
Description
Function of the input, debounce time, number of telegrams, block
function, etc.
Additionally in the case of I2: Selection of the temperature sensor,
temperature calibration, etc.
Object type, transmission behaviour, etc. can be set for each object
individually.
Switching statuses in the case of direct control
Object type, transmission behaviour, etc. can be set for each object
individually.
Type of control.
Type of control.
Additional telegrams for Dimming and Blinds.
Direction of action, cycl. transmission, etc.
8