Theben DU 1 Manual page 59

6.7.4.2 Blinds parameter page
Designation
Operation
Movement is stopped by
Response after restoration of the
bus supply
20
Response when the block is set
Response when the block is
cancelled
DU 1 RF: Response after download or mains restoration
20
Flush-mounted dimming actuator DU 1
Values
One button operation
DOWN
UP
Releasing the button
Short operation
none
UP
DOWN
UP after 5 s
UP after 10 s
UP after 15 s
DOWN after 5 s
DOWN after 10 s
DOWN after 15 s
Ignore block
no response
UP
DOWN
no response
ON
OFF
Description
The input distinguishes between
a long and a short button push,
and can thus carry out 2
functions.
The blinds are operated with a
single button.
Short button push = step.
Long button push = move.
Short button push = step.
Long button push = lower.
Short button push = step.
Long button push = raise.
How is the stop command to be
triggered?
Do not respond.
Raise blinds
Lower blinds
Raise blinds
with delay
Lower blinds with delay
The block function is ineffective
with this telegram.
Do not respond when the block is
set.
Raise blinds
Lower blinds
Do not respond when the block is
cancelled.
Raise blinds
Lower blinds