Table of Contents
Advertisement
6.3.5
Objects for the external inputs: Blinds function
Object 41: Channel I1 step / stop
Sends step/stop commands to the blind actuator.
Object 42: Channel I1 UP/DOWN, UP, DOWN
Sends operating commands to the blind actuator.
Object 43: Channel I1.1 switching, priority, percentage, height %
Output object for the additional function upon double-click.
5 telegram formats can be set:
Switching ON/OFF, priority, send percentage value, send value, height %.
Object 44: Channel I1.1 slat %
Slat telegram for positioning the blinds upon double-click (together with object
height %, with object type = height + slat).
Object 45: Channel I1 block = 1, or block = 0
The channel is blocked via this object.
The acting direction of the block object and behaviour when the block is set or cancelled can be
configured.
Objects 51-55
Objects for channel I2
6.3.6
Objects for the external inputs: Temperature input function
Object 51: Channel I2 actual value for temperature
Sends the temperature measured at input I2 (remote sensor or floor temperature sensor).
The temperature input function is only possible with input I2.
7
Flush-mounted dimming actuator DU 1
7
Advertisement
Table of Contents
