Theben DU 1 Manual page 38

6.6.8 Scenes
The dimming channel C1 can participate in up to 8 scenes.
Designation
Block telegram for scenes
All channel scene statuses
Participation in central scene
object
Channel reacts to
Assigned dimming value
Permit teach-in
Channel reacts to
Flush-mounted dimming actuator DU 1
Values Description
Block with 1
0 = cancel block
(standard)
1 = block
Block with 0 0 = block
1 = cancel block
Note: With this setting, the scenes
are always blocked immediately after
reset or download.
Overwrite on A download deletes all scene
download memories in a channel, i.e. all
previously taught-in scenes.
When a scene number is called, the
channel assumes the configured
assigned dimming value (see below).
See appendix: Entering scenes
without telegrams
Unchanged after All previously taught-in scenes are
download saved.
However, the scene numbers to
which the channel should react can
be changed (see below: Channel
reacts to).
No
Should the device react to the central
yes scene object?
No scene number First of the 8 possible scene numbers
Scene number 1
to which the channel is to react.
Scene number 63
Off New dimming value to be assigned
10%, 20%, 30%
to the selected scene number.
40%, 50%, 60%,
70%, 80%, 90%, Only possible if the scene statuses
100% are to be overwritten after download.
No Scenes can only be called up.
Yes
The user can both call up and teach
in or amend scenes.
No scene number Second of the 8 possible scene
Scene number 1 numbers
Scene number 2
...
Scene number 63