Theben DU 1 Manual page 33

6.6.4 Soft switching
Designation
Time for Soft ON
Dimming value after
Soft ON
Time between Soft ON
and Soft OFF
Time for Soft OFF
Flush-mounted dimming actuator DU 1
Values
0 s, 1 s , 2 s, 4 s
6 s, 8 s, 12 s, 15 s
24 s, 30 s, 45 s, 1 min
2 min, 3 min, 4 min, 5 min
6 min, 7 min, 8 min, 9 min
10 min, 12
15 min, 20 min
30 min, 40
50 min, 60 min
10%, 20%, 30%
40%, 50%, 60%,
70%, 80%,
100%
until Soft OFF telegram
1 s, 2 s, 3 s, 4 s
5 s, 6 s, 7 s, 8 s, 9 s
10 s, 15 s, 20 s, 30 s
40 s, 50 s, 1 min, 2 min
3 min, 4 min, 5 min, 6 min
7 min, 8 min, 9 min, 10 min
12 min, 15 min, 20 min,
30 min, 40 min, 50 min,
60 min
0 s, 1 s, 2 s, 4 s
6 s, 8 s, 12 s, 15 s
24 s, 30 s, 45 s, 1 min
2 min, 3 min, 4 min, 5 min
6 min, 7 min, 8 min, 9 min
10 min, 12 min, 15 min,
20 min, 30 min, 40 min,
50 min, 60 min
Description
Duration of the dimming-up phase
(t1)
for soft switching (see appendix).
0 s = switch on immediately.
min,

See appendix for further
min,
details: Retriggering and
premature switch off.
Final value at the end of the
soft on phase (val)
90%, Comment:
Here again the configured minimum
dimming value needs to be taken into
account.
No time restriction; Soft OFF phase is
initiated by a telegram.
Delay (t2) until the start of the Soft
OFF phase
Duration of the Soft OFF phase (t3).
0 s = switch off immediately

See appendix for further
details: Retriggering and
premature switch off.