Table of Contents
Advertisement
6.7.3.1
Double-click parameter page
Designation
Object type
Telegram
Send cyclically
Response after
restoration of the bus
supply
17
Response when the
block is set
DU 1 RF: Response after download or mains restoration
17
Flush-mounted dimming actuator DU 1
Values
Switching (1 bit)
Priority (2 bit)
Value 0-255
Percentage value (1 byte)
With object type = switching 1
bit
ON
OFF
INVERT
With object type = priority 2 bit
inactive
ON
OFF
With object type = value 0-255
0-255
With object type = percentage
value
1 byte
0-100%
do not send cyclically
every min
every 2 min
every 3 min
...
every 45 min
every 60 min
none
As
with
double-click
(immediately)
As with double-click (after 5 s)
As with double-click (after 10 s)
As with double-click (after 15 s)
Ignore block
no response
as with double-click
Description
Telegram type for this object.
Send switch-on command
Send switch-off command
Invert current state (ON-OFF-ON
etc.)
Function
Priority inactive
(no control)
Priority ON
(control: enable, on)
Priority OFF
(control: disable, off)
Any value between 0 and 255
can be sent.
Any percentage value between 0
and 100% can be sent.
How often should it be resent?
Do not send.
Send update telegram
immediately or with delay.
The value to be sent depends on
the value configured for double-
click.
The block function is ineffective
with this telegram.
Do not respond when the block is
set.
Respond as with a double-click.
Value
0 (00
)
bin
3 (11
)
bin
2 (10
)
bin
Advertisement
Table of Contents
