Communication Objects; Introduction; Overview - Theben RMG 8 Manual

Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB

3.3 Communication Objects

3.3.1 Introduction

The basic setting for each channel is the parameterization as a drive controller or as a switching
channel with 2 outputs.
The function and thus the type and designation of the individual objects depend on the use of the
corresponding channel, i.e. drive, roller shutter, blinds, switching channel, timer and the like.
In this case, we will use channel 1 as an example.

3.3.2 Overview

3.3.2.1 Channel Parameterised as a Drive Mechanism
When the channel is parameterised as a drive mechanism, you can select the type of element that is to be driven
(see the table below).
Object
Property
no.
Name
Function
0
Type
Reaction
Name
Function
1
Type
Reaction
Name
Function
2
Type
Reaction
Name
Function
3
Type
Reaction
Name
Function
4
Type
Reaction
As of: Apr-06 (Subject to change without notice)
Selected type of driven element
Roller shutter / textile sunshade
Drive 1 stop
Stop roller blind
not available
Drive 1 up/down
up / down
1 Bit
receive
1 Bit
receive
Drive 1 height
Height [%]
1 Byte
receive / (feedback height)
Position of the slats in %
receive / (feedback slats position)
Drive 1 auto comfort
Auto comfort
1 Bit
receive
theben
Blinds
Drive 1 step / stop
Step/stop shutter
Drive 1 slats
1 Byte
Page 10 of 36