Resetting Admin Pc To Its Regular Ip Address; Logging In (Ii); Setting Administrative Functions - Multitech FaxFinder FF110 Quick Start Manual

Server Installation

4. Resetting Admin PC to Its Regular IP Address

In step #1 above, you recorded the original IP address of the
administrator's PC and then reset it to the IP address required to
allow communication with the FaxFinder unit. You must now set the
IP address of the administrator's PC back to its original value.

5. Logging In (II)

Having reset the IP address of the administrator's PC, you must log
into the FaxFinder Server software again. Go to the Login screen,
enter admin as User Name and admin as Password.

6. Setting Administrative Functions

Go to the FaxFinder Phone Book screen.
Name
Ad mini strator
POTS Li ne
D ead L etter Box
a. General Admin Email Address & DID
i. In the "admin" row of the Phone Book screen, enter
the name and user ID to be used for the FaxFinder
administrator. All incoming faxes will be marked as
coming from this administrator. Then enter the email
address of the party who will act as the FaxFinder
administrator.
ii. Click on Update in the "admin" row. At this point, a
Login screen will appear and you will be asked to log
in again. Log in using the administrator's User ID (as
listed in the "User ID" column) and the administrator's
current password (at this point, it should be admin).
Multi-Tech FaxFinder Quick Start
Phone Book
Ext
User ID Email Address
Function
update
a dmin
update
update
update delete
update
update
update
add
12
delete
delete
delete