Multitech FaxFinder FF110 Quick Start Manual page 20

Server Installation
U.S.A.) require that the originating phone number be printed on
each fax page. The value entered in the "Fax ID" field will
appear in the fax log printed by the sender's fax machine and,
typically, will be printed at the top of each page of the
transmitted fax.
e. Smart Dial. When Smart Dial mode is ON, the FaxFinder will
look for a dial tone before dialing. If, under normal
circumstances, no dial tone is presented to the FaxFinder, then
set Smart Dial to OFF. When Smart Dial is OFF, the FaxFinder
modem will seize the phone line and dial after a 3-second pause
whether a dial tone is present or not.
Hint: If 'no dial tone' messages appear consistently,
set Smart Dial to OFF.
f. Click Update.
Name
Han k Grego ry - Admin
POTS Li ne
Dea d Letter Bo x
Han k Grego ry
g. Click on Current Status. Watch the Current Status: POTS
Modem 2 portion of the screen. The "State" of the POTS
Modem should be "Waiting for Ring."
h.Test Call.. From a different POTS phone, dial the number of the
POTS phone line to which the FaxFinder is attached.
i. In the Current Status: POTS Modem 2 screen, the "State" field
should change to "Waiting for Connect." On the phone, you
should hear modem dialup/negotiation tones.
Multi-Tech FaxFinder Quick Start
Phone Book
User ID E mail Address DID# Function
update
a dmin hg g@rmc83.com
update
hg g@rmc83.com
update
hg g@rmc83.com
h ank update delete
hgg @rmc83.com 242 6
update
update
update
add
20
delete
delete
delete