Multitech FaxFinder FF110 Quick Start Manual page 29

Multi-Tech FaxFinder Quick Start
3. Enter, in the appropriate fields, the Username and Password
that the client will use when accessing this FaxFinder unit. (The
Username in the FaxFinder client software is the same as the
User ID in the FaxFinder server software.) If the client is to be
associated with multiple FaxFinder units, a different Username
and Password could be established for each. However, in most
cases, it is advisable (for the sake of simplicity and
convenience) to use the same Username and Password for all
FaxFinder units. Click OK.
4. A new FaxFinder entry should appear on the "Device Status" tab
of the FaxFinder Fax Client Software screen.
The status of the newly registered FaxFinder unit should
momentarily go from "Logging in" to "Idle." If it goes to Login
Failure, then one of two things is wrong:
a. The IP address or domain name is wrong. If that is the case,
delete that entry (by right click-
otherwise,
b. The Username/Password combination may be wrong. Verify
that the Username/Password combination in the client
software screen matches the UserID/Password combination
established in the FaxFinder Server software screen.
Client Installation
), and enter a new one;
DELETE
29