Xerox WorkCentre 385 Service Manual page 94

REP 4.36 Knock Up Unit, Spring & Holder,
Separate Unit
Removal
1. Remove the following:
a. Pickup Roller (REP 4.27).
2. Release the springs at both sides of the unit, then remove the Knock Up
Unit.
REP 4.36 Knock Up Unit, Spring & Holder, Separate Unit
3. Remove the Knock Up Spring.
4. Remove the Spring Holder with small spring on rear post.
12/98
www.printcopy.info
4 - 44
WorkCentre 385