REP 4.8
Rollers (ADF, Drive Roller, Exit Roller)
Removal
1.
Remove the following:
a.
Front Cover (REP 4.11).
b.
OPE Cover (REP 4.3).
c.
White Roller (REP 4.2).
2.
Open the control panel, then remove four screws.
3.
Lift the scan lower frame up.
REP 4.8 Rollers (ADF, Drive Roller, Exit Roller)
4.
Remove three rollers. Use extreme caution when you remove rollers to
prevent the gears on the right end of the rollers from being damaged.
Replacement
1.
Reinstall the components in the reverse order.
12/98
www.printcopy.info
4 - 10
WorkCentre 385