Handset And Handset Cradle - Xerox WorkCentre 385 Service Manual

Handset and Handset Cradle*

* Not available in all markets.
1. Plug one end of the coiled cord into the jack on the handset. Then plug the
other end into the modular jack on the bottom of the handset cradle.
Cradle
2. Plug the cradle's modular cords into the modular jacks on the left side of
your machine.
Black Cord
Route the excess cord so that it
can be inserted into the cradle.
WorkCentre 385
3.
Handset
12/98
www.printcopy.info
1 - 3
Attach the Handset Cradle to the main body. Insert the three tabs of the
cradle into the slots on the left side of the main body as shown, and push it
up and to the rear into position.
Handset and Handset Cradle